Squids 3713 Elastic Loop Tool Tails with Two-Piece Swiveling D-Rings act as a handy retrofit attachment point for a wide variety of tools, to minimize the potential for dangerously dropped objects when working at heights. Heavy-duty nylon webbing is double-stitched with high-tensile-strength nylon thread to ensure reliable performance in even the harshest work environments. Built for versatility and secure, always reliable tool tethering, these tails feature a stretchable nylon loop with an adjustable barrel lock on one end and a corrosion-resistant, two-piece swiveling D-ring on the other. Once the loop end of the tail is secured to a tool or anchor point, the D-ring acts as a captive hole for hassle-free tool-lanyard attachments. By allowing for seamless rotation, the swiveling mechanism helps prevent the overall tool-tethering system from getting tangled or bound up. For best results, always reinforce the loop end of the tool tail with Squids 3775 Self-Adhering Tool Traps or Squids Cold-Shrink Tool Traps (tool traps sold separately). When working at heights, it's essential to tether your tools, and these tool tails are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. When used properly, Squids 3713 Elastic Loop Tool Tails are third-party certified to a maximum tethering capacity of 10 lb with a 2:1 safety factor. Fastener Style: Elastic Loop; Barrel Lock; Two-Piece Swiveling D-Rings; Lanyard Color(s): Lime/Black; Length: 15"; Safety Breakaway Connector: No.

The Squids 3714 Elastic Tool Tail Lanyard features a swiveling self-locking captive-eye aluminum carabiner on one end and a low-profile cinch loop on the other to tether tools up to 10 lbs and prevent dropped or falling objects from occurring on the job. Its 15" length helps reduce fall distance in the event of a drop and also keeps tools statically tethered to belts, pouches, bags and other anchoring or storage locations. This lanyard is constructed with flexible elastic webbing to reduce snag hazards and tangles. The low-profile cinch loop end easily fits into small captive holes in tools that can otherwise be challenging to tether. With a captive eye design, the self-locking carabiner securely tethers tools while better predicting load direction and preventing the lanyard from sliding into the carabiner gate. The carabiner's swiveling design prevents binding and tangling when being used with rotating tools like screwdrivers. For best use, either tape the loop end onto a hand tool with Squids 3755 Self-Adhering Tape Trap or use the cinch loop or carabiner end to tether tools with captive holes. To complete the tethering system, attach the opposite end to a Squids Wristband Anchor or other anchoring location for convenient tethering. When working at heights, it's essential to tether your tools as part of your fall protection plan. This tool lanyard is built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. Ideal for those who need to tether tools in industries like construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobs at heights. Fastener Style: Carabiner; Lanyard Color(s): Black; Length: 15"; Safety Breakaway Connector: No.

When retrofitting tools with Squids Tool Tails for lanyard tethering, use Squids Cold-Shrink Tool Traps to properly complete a reliable, secure connection (Tool Tails sold separately). Patented, cold-shrink technology requires no heat source, ensuring easy application. EPDM rubber material is acid- and temperature-resistant. For those working at heights, it's essential to tether your tools, and these tool traps can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. Squids 3726-Large-size trap accommodates tool-attachment points with a diameter between 1.75" and 2.5". Fastener Style: Cold-Shrink Wrap; Lanyard Color(s): Black; Length: 6"; Safety Breakaway Connector: No.

The Squids 3745 Tool Grip and Tether Attachment Point installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1 lb, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. Designed in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap's pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handleproviding greater comfort, torque and an enhanced grip. Fastener Style: Ring; Lanyard Color(s): Black; Length: 5.5"; Safety Breakaway Connector: No.

Whether it's hand tools, power tools or measuring devices, when it comes to retrofitting objects with Squids Tool Tails for lanyard tethering, use Squids 3755 Self-Adhering Tool Traps to properly complete a secure connection. These ultra-durable, fiberglass-reinforced, silicone-rubber traps not only provide a more secure, more reliable attachment point when retrofitting objects for tool-lanyard tethering, but they're also ideal for enhancing the gripping surface on those retrofitted objects. Adhesive-free design delivers mess-free application and removal, while also ensuring rock-solid performance in both oppressively hot summer and bone-chillingly cold winter working environments. Compatible with most Squids Tool Tails and Tool Lanyards (Tool Tails and Lanyards sold separately). Maximum safe working capacity of up to 15 lb (depending on the trap length, tail type, lanyard design and tool selectedrefer to the product's included instructions for more details). No heat source required for proper Self-Adhering Tool Trap application. For those working at heights, it's essential to tether your tools, and these tool traps can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. Fastener Style: Self-Adhering Wrap; Lanyard Color(s): Orange; Length: 12 ft; Safety Breakaway Connector: No.

Whether it's hand tools, power tools or measuring devices, when it comes to retrofitting objects with Squids Tool Tails for lanyard tethering, use Squids 3755 Self-Adhering Tool Traps to properly complete a secure connection. These ultra-durable, fiberglass-reinforced, silicone-rubber traps not only provide a more secure, more reliable attachment point when retrofitting objects for tool-lanyard tethering, but they're also ideal for enhancing the gripping surface on those retrofitted objects. Adhesive-free design delivers mess-free application and removal, while also ensuring rock-solid performance in both oppressively hot summer and bone-chillingly cold winter working environments. Compatible with most Squids Tool Tails and Tool Lanyards (Tool Tails and Lanyards sold separately). Maximum safe working capacity of up to 15 lb (depending on the trap length, tail type, lanyard design and tool selectedrefer to the product's included instructions for more details). No heat source required for proper Self-Adhering Tool Trap application. For those working at heights, it's essential to tether your tools, and these tool traps can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. Fastener Style: Self-Adhering Wrap; Lanyard Color(s): Gray; Length: 12 ft; Preprinted Design: No.

Whether it's hand tools, power tools or measuring devices, when it comes to retrofitting objects with Squids Tool Tails for lanyard tethering, use Squids 3755 Self-Adhering Tool Traps to properly complete a secure connection. These ultra-durable, fiberglass-reinforced, silicone-rubber traps not only provide a more secure, more reliable attachment point when retrofitting objects for tool-lanyard tethering, but they're also ideal for enhancing the gripping surface on those retrofitted objects. Adhesive-free design delivers mess-free application and removal, while also ensuring rock-solid performance in both oppressively hot summer and bone-chillingly cold winter working environments. Compatible with most Squids Tool Tails and Tool Lanyards (Tool Tails and Lanyards sold separately). Maximum safe working capacity of up to 15 lb (depending on the trap length, tail type, lanyard design and tool selectedrefer to the product's included instructions for more details). No heat source required for proper Self-Adhering Tool Trap application. For those working at heights, it's essential to tether your tools, and these tool traps can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. Fastener Style: Self-Adhering Wrap; Lanyard Color(s): Orange; Length: 12 ft; Preprinted Design: No.

Whether it's hand tools, power tools or measuring devices, when it comes to retrofitting objects with Squids Tool Tails for lanyard tethering, use Squids 3755 Self-Adhering Tool Traps to properly complete a secure connection. These ultra-durable, fiberglass-reinforced, silicone-rubber traps not only provide a more secure, more reliable attachment point when retrofitting objects for tool-lanyard tethering, but they're also ideal for enhancing the gripping surface on those retrofitted objects. Adhesive-free design delivers mess-free application and removal, while also ensuring rock-solid performance in both oppressively hot summer and bone-chillingly cold winter working environments. Compatible with most Squids Tool Tails and Tool Lanyards (Tool Tails and Lanyards sold separately). Maximum safe working capacity of up to 15 lb (depending on the trap length, tail type, lanyard design and tool selectedrefer to the product's included instructions for more details). No heat source required for proper Self-Adhering Tool Trap application. For those working at heights, it's essential to tether your tools, and these tool traps can easily be used by any worker to help avoid accidentally dropping objects that could cause extensive property damage and serious, potentially deadly injuries. Fastener Style: Self-Adhering Wrap; Lanyard Color(s): Gray; Length: 12 ft; Safety Breakaway Connector: No.

The Squids 3785 Split Ring Tool Attachment is designed to create a larger retrofit attachment point on tools with small captive holes for tethering tools up to 2 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. Fastener Style: Split Ring; Lanyard Color(s): Silver; Length: 1" dia; Safety Breakaway Connector: No.

The Squids 3785 Split Ring Tool Attachment is designed to create a larger retrofit attachment point on tools with small captive holes for tethering tools up to 2 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. Fastener Style: Split Ring; Lanyard Color(s): Silver; Length: 1.5" dia; Safety Breakaway Connector: No.

The Squids 3791 Locking Collar with Tool Attachment Point installs onto connecting, sleever and wrecking bars to create a retrofit attachment point for tethering tools up to 7 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on connecting, sleever and wrecking bars with no captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. To install, slide the locking collar onto a connecting, sleever or wrecking bar and use the included hex key to tighten the dual set screws to secure into place. Built with strong galvanized steel, this durable locking collar is corrosion-resistant in extreme environments. The locking collar allows the bar to be safely holstered by providing a catchpoint when stored on a tool belt and when working at heights. The collar features a swiveling connection point in the middle for tethering and prevents tangles and binds when used with a lanyard. This tool attachment portion of the locking collar can be removed and the tool collar can be used solely for proper holstering. This tool tether attachment is built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. Ideal for those working the iron/steel trades and tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk. This locking collar is compatible with straight-shafted round or hex connecting, sleever and wrecking bars ranging from 0.75" and 0.88". Each size comes with one locking collar and a hex key for installation. Fastener Style: Collar; Lanyard Color(s): Silver; Length: 0.75"; Safety Breakaway Connector: No.

The Squids 3791 Locking Collar with Tool Attachment Point installs onto connecting, sleever and wrecking bars to create a retrofit attachment point for tethering tools up to 7 lbs, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on connecting, sleever and wrecking bars with no captive holes. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. To install, slide the locking collar onto a connecting, sleever or wrecking bar and use the included hex key to tighten the dual set screws to secure into place. Built with strong galvanized steel, this durable locking collar is corrosion-resistant in extreme environments. The locking collar allows the bar to be safely holstered by providing a catchpoint when stored on a tool belt and when working at heights. The collar features a swiveling connection point in the middle for tethering and prevents tangles and binds when used with a lanyard. This tool attachment portion of the locking collar can be removed and the tool collar can be used solely for proper holstering. This tool tether attachment is built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. Ideal for those working the iron/steel trades and tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk. This locking collar is compatible with straight-shafted round or hex connecting, sleever and wrecking bars ranging from 0.75" and 0.88". Each size comes with one locking collar and a hex key for installation. Fastener Style: Collar; Lanyard Color(s): Silver; Length: 0.87"; Safety Breakaway Connector: No.