Orgapack OR-M 525-S Strapper

Orgapack OR-M 525-S Strapper Specifications

Heat weld sealing 30 s
Preheating time
Electrical supply Single phase
115 V / 60 Hz, 1PNE
Tolerance -15%/+20%
Mains fuse 10 amp
Performance
Modus Modus Modus
Sleep Stand-by Oper. Max.
Watt 26 W 63 W 446 W
Volt Ampere 38 VA 64 VA 451 VA
Reactive Power 27 VAR 9 VAR 94 VAR
Power Factor PF 0,60 PF 0, 88 PF 0,98
COS Phi 0,69 0,99 0,99
Ampere 0,19A 0,32A 2,3 A
Room temperature 10 - 40°C
Relative humidity 10 - 65%
Cycles per minute up to*
(without conveyor) 70/min.
Working heights see layout on page 4
Conveyor driven conveyor belt
Conveyor speed, stepless 5 - 45 m/min
Machine weight 170 kg
Color Blue 1M 4762
IP- Protection level without IP protection
PACKAGES
Width x height min. 50 x 20 mm
Width / height max., ./. 50 mm
Arch dimension
Length min. 200 mm
Weight max. 35 kg
Plastic Strap (PP) 9mm
Strap width 323.109.540
Strap thickness 0,40 - 0,60 mm
Strap coil, Ø inside/outside 200 mm / 430 mm
Strap tension 9 mm 450 N
The polypropylene straps used for the respective applications must
correspond with the strap specifications recommended by Orgapack!
*Performance: Depends on arch and package dimensions, conveyor
speed, package distances and strap tension.
ARCH DIMENSION
Machines Strap width Arch dimension Strap tension
Width x Height
OR-M 555 9 mm 650 x 500 mm 450 N

Orgapack OR-M 525-S Strapper Features

Adjustable working height
• Four castors, two with brakes
• Closed strap arch system
• Heat seal
• Automatic strap threading device
• Automatic strap end ejection
• Food pedal
• Control panel with digital display
• Strap loop ejection for cycles without
product
• Cycle counter
• Electrical supply cable, 5 m
• Dispenser position: side mounted
• Error message display
• Strap tension key «Soft»
Interface
• 4-pin AMP connector (3 pieces)
• All signals potential free
• Ready for operation signal
• General fault signal
• Strapping input signal

Orgapack OR-M 525-S Strapper Photos