Sigma Products > Orgapack OR-M 555 Fully Automatic Strapper

Orgapack OR-M 555 Fully Automatic Strapper

Orgapack OR-M 555 Fully Automatic Strapper Specifications

Heat weld sealing 30 s
Preheating time
Electrical supply Single phase
115 V / 60 Hz, 1PNE
Tolerance -15%/+20%
Mains fuse 10 amp
Performance
Modus Modus Modus
Sleep Stand-by Oper. Max.
Watt 50 W 70 W 607 W
Volt Ampere 53 VA 78 VA 622 VA
Reactive Power 19 VAR 33 VAR 193 VAR
Power Factor PF 0,61 PF 0, 82 PF 0,98
COS Phi 0,94 0,91 0,99
Ampere 0,28A 0,38A 3,0 A
Room temperature 10 - 40°C
Relative humidity 10 - 65%
Cycles per minute up to*
(without conveyor) 70/min.
Working heights see layout on page 4
Conveyor driven conveyor belt
Conveyor speed, stepless 5 - 45 m/min
Machine weight 300 kg
Color Blue 1M4762
IP- Protection level without IP protection
PACKAGES
Width x height min. 100 x 50 mm
Width / height max., ./. 50 mm
Arch dimension
Length min. 200 mm
Weight max. 35 kg
Plastic Strap (PP) 9mm
Strap width 372.609.545
Strap thickness 0,40 - 0,60 mm
Strap coil, Ø inside/outside 200 mm / 430 mm
Strap tension 9 mm 450 N
The polypropylene straps used for the respective applications must
correspond with the strap specifications recommended by Orgapack!
*Performance: Depends on arch and package dimensions, conveyor
speed, package distances and strap tension.
ARCH DIMENSION
Machines Strap width Arch dimension Strap tension
Width x Height
OR-M 555 9 mm 650 x 500 mm 450 N

Orgapack OR-M 555 Fully Automatic Strapper Features

• Adjustable conveyor height
• Fold-out belt conveyor system
• Four swivel castors with brakes
• Closed strap arch system
• Heat seal
• Automatic strap feeder
• Automatic strap end ejection
• Strap loop ejection for cycles without
product
• Cycle counter
• Electronic control system with
microprocessor + Siemens S7-1200 PLC,
free memory capacity for peripheral
modules
• Emergency off
• Dispenser position: Side-mounted
• Electrical power cable, 5 m
• Basic photocell for detecting and
positioning the packages
• Operation / indication
• Control panel, mounted on
• dispenser side
• Graphic display for program
• selection and strap spacings
• Error message display
• Interface
• 24 pin Harting connector
• Output signals (potential free)
• Ready signal to feed conveyor
• General fault signal
• Input signal (potential free)
• Ready signal from follow-on conveyor

Orgapack OR-M 555 Fully Automatic Strapper Photos

From Stretch Wrappers to Carton Sealers, Sigma Supply has the equipment, installation, maintenance and training to maximize the efficiency and profitability of your packaging operation.

If you'd like to check availability or pricing for an item, ask to speak with your local sales representative.

Equipment Service

Our technical services group of factory-trained technicians is prepared to offer the highest level of support in the industry, including new installations, providing and installing replacement parts, training, and preventive maintenance. We pride ourselves on our level of service and will respond quickly and professionally.

Contact us for more information about our service programs and to learn if same-day service is available in your area.

Contact Us

Replacement Parts

Looking for a replacement part for your packaging equipment? SSNA is your source for replacement parts for all manner of packaging equipment, as well as installation, service and repair. Our technicians are happy to assist sourcing and pricing the parts you need as well as quoting for professional installation.

Contact us today for more information about replacement parts and installation options in your area.

Contact Us