Orgapack OR-M 555i Fully Automatic Strapper

Orgapack OR-M 555i Fully Automatic Strapper Specifications

Heat weld sealing 30 s
Preheating time
Electrical supply Single phase
115 V / 60 Hz, 1PNE
Tolerance -15%/+20%
Mains fuse 10 Amp
Performance
Modus Modus Modus
Sleep Stand-by Oper. Max.
Watt 50 W 70 W 607 W
Volt Ampere 53 VA 78 VA 622 VA
Reactive Power 19 VAR 33 VAR 193 VAR
Power Factor PF 0,61 PF 0, 82 PF 0,98
COS Phi 0,94 0, 91 0,99
Ampere 0,28A 0,38A 3,0 A
Room temperature 5 - 40°C
Relative humidity 10 - 85%
Cycles per minute up to*
(without conveyor) 70/min.
Working heights see layout on page 4
Conveyor driven conveyor belt
Conveyor speed, stepless 5 - 45 m/min
Machine weight 280 kg
Quality stainless steel
IP- Protection level IP 56 / DIN 60529 + IPX9K / ISO 20653
PACKAGES
Width x height min. 100 x 50 mm
Width / height max. ./. 50 mm
Arch dimension
Length min. 200 mm
Weight max. 35 kg
Plastic Strap (PP) 9 mm
Strap width 372.609.545
Strap thickness 0,40 - 0,60 mm
Strap coil, Ø inside/outside 200 mm / 430 mm
Strap tension 9 mm 450 N
The polypropylene straps used for the respective applications must
correspond with the strap specifications recommended by Orgapack!
*Performance: Depends on arch and package dimensions, conveyor
speed, package distances and strap tension.
ARCH DIMENSION
Machines Strap width Arch dimension Strap tension
Width x Height
OR-M 555i 9 mm 650 x 500 mm 450 N

Orgapack OR-M 555i Fully Automatic Strapper Features

• Adjustable conveyor height
• Fold-out belt conveyor system
• Four swivel castors with brakes
• Closed strap arch system
• Heat seal
• Automatic strap feeder
• Automatic strap end ejection
• Strap loop ejection for cycles without
product
• Cycle counter
• Electronic control system with
microprocessor + Siemens S7-1200 PLC,
free memory capacity for peripheral
modules
• Emergency off
• Dispenser position: Side mounted
• Electrical power cable, 5 m
• Basic photocell for detecting and
positioning the packages
• Operation / indication
• Control panel, mounted on dispenser
side
• Graphic display for program selection
and strap spacings
• Error message display
• Interface
• 24 pin Harting connector
• Output signals (potential free)
• Ready signal to feed conveyor
• General fault signal
• Input signal (potential free)
• Ready signal from follow-on conveyor

Orgapack OR-M 555i Fully Automatic Strapper Photos