S2K Commerce - Products Dropdown
Actions
Web Content Viewer
Actions
Heat weld sealing preheating time 30 s
Electrical supply Single phase AC 230 V / 50 Hz, 1PNE and 115 V / 60 Hz, 1PNE Tolerance -15%/+20% Mains fuse 10 AT
Performance at 225VAC
| Modus Sleep | Modus Stand-by | Modus Oper. Max | |
| Watt | 50 W | 70 W | 607 W |
| Volt Ampere | 53 VA | 78 VA | 622 VA |
| Reactive Power | 19 VAR | 33 VAR | 193 VAR |
| Power Factor | PF 0,61 | PF 0,82 | PF 0,98 |
| COS Phi | 0,94 | 0,91 | 0,99 |
| Ampere | 0,28 A | 0,38 A | 3,0 A |
Room temperature 5 - 40°C (41 - 104°F)
Relative humidity 10 - 85%
Cycles per minute up to* (without conveyor) 70/min.
Working Heights see layout
Conveyor driven conveyor belt
Conveyor speed, stepless 5 – 45 m (5,5 – 50 yd)
Machine Weight 280 kg (617 lbs)
Material stainless steel
IP- Protection level IP 56 / DIN 60529 + IPX9K / ISO 20653
| Packages | SGP 4432 | SGP 4433 |
| Width x height min. | 150 x 100 mm (6 x 4") | 150 x 60 mm (6 x 2,5") |
| Width / height max | 550 x 495 mm (22 x 19,5") | 550 x 495 mm (22 x 19,5") |
| Arch Dimension | ||
| Length min | 250 mm (10") | 250 mm (10") |
| Weight max | 35 kg (77lbs) | 35 kg (77lbs) |
Plastic Strap (PP)
| Strap Width | 9 mm | (3/8") |
| 12 mm | (1/2") | |
| Strap thickness | 0,40 - 0,60 mm | (0,015 - 0,024") |
| Strap coil, Ø inside/outside | 200 / 430 mm | (8/17") |
| Strap tension manual mode | 450 N | |
| Strap tension automatic mode | 600 N |
The polypropylene straps used for the respective applications must correspond with the strap specifications recommended by Signode! *Performance: Depends on arch and package dimensions, conveyor speed, package distances and strap tension.
Arch dimension
| Machines | Strap Width | Arch Dimension (wxh) | Strap Tension |
| SGP 4432 | 9 / 12 mm (3/8 / 1/2") | 650 x 500 mm (26 x 20") | 450 N |
| SGP 4433 | 9 / 12 mm (3/8 / 1/2") | 650 x 600 mm (26 x 24") | 450 N |
■ Adjustable seal height
■ Height-adjustable belt conveyor system
■ Four castors with brakes
■ Closed strap arch system
■ Heat seal
■ Automatic strap threading
■ Automatic strap end ejection
■ Strap loop ejection for cycles without product (SGP 4432)
■ Small pressure plate (SGP 4433)
■ Cycle counter
■ Electronic control system with microprocessor + Siemens S7-1200 PLC, free memory capacity for peripheral modules
■ Machine-stop button
■ Dispenser, fitted on top side of machine
■ Protection hood for dispenser
■ Electrical supply cable, 5 m / 5,5 yd.
■ Basic photocell for detecting and positioning the packages
■ Adjustable side guides
■ Operation / Indication
■ Swivelable control panel
■ Graphic display for program selection and strap spacing
■ Error message display
■ Interface
■ 24 pin Harting connector
■ Output signals (potential free)
■ Ready signal to feed conveyor
■ General fault signal
■ Input signal (potential free)
■ Ready signal from follow-on conveyor
SGP 4432 / 4433
From Stretch Wrappers to Carton Sealers, Sigma Supply has the equipment, installation, maintenance and training to maximize the efficiency and profitability of your packaging operation.
If you'd like to check availability or pricing for an item, ask to speak with your local sales representative.
